相同封裝的貼片電容從外觀上是無法區(qū)分其電容值的，相同封裝的100nF和1nF的電容，從外觀上很難區(qū)分，雖然在厚度上可能不同。那么相同貼片大小的電容可以替換嗎？這個要根據具體情況來判斷。

　　The capacitance values of chip capacitors in the same package can not be distinguished from the appearance, while the capacitance of 100nF and 1NF of the same package is difficult to distinguish from the appearance, although the thickness may be different. Can capacitors of the same chip size be replaced?This should be judged according to the specific situation.

　　1.如果是芯片電源端的芯片或許可以替換

　　If it's a chip, the chip on the power side may be replaced

　　在設計電路時，在芯片的電源引腳上，我們都會設計一個100nF的瓷片電容用以對電源進行濾波。如果是這個電容掉了，那么替換的可能性比較大，即使這個電容掉了不焊接，那么問題也可能不大。

　　When designing the circuit, we will design a 100nF ceramic capacitor on the power pin of the chip to filter the power supply. If the capacitor is dropped, the possibility of replacement is relatively large. Even if the capacitor is not welded, the problem may not be big.

　　2.如果是芯片的外圍電容則不能替換

　　If it is the peripheral capacitance of the chip, it cannot be replaced

　　有些芯片在設計電路時，需要根據手冊上的描述在某個引腳上設計特定容值的電容，這類電容對芯片的正常工作起著重要的作用，此類電容就不能被任意替換。

　　Some capacitors of this kind can not be used in the design of a certain kind of chip according to the capacitance of a certain chip.

　　如果在設計傳感器時，有一個芯片的某個引腳需要特定容值的電容，如果電容的位置放錯了，導致電容用錯了。在產品測試時，產品的功能沒有任何問題，但是在測試其響應時間時出現(xiàn)問題，無法滿足要求。所以，這類電容不能替換。

　　If a certain pin of a chip needs a capacitor with a specific capacitance value when designing a sensor, if the position of the capacitor is wrong, the capacitor will be misused. In the product test, there is no problem with the function of the product, but there is a problem when testing its response time, which can not meet the requirements. Therefore, such capacitors cannot be replaced.